Showing 1–48 of 103 results

  • Quick View
    £5.34£6.24 + VAT

    Slimline design for low profile window frames.
    Up to 3200mm Equivalent Area.
    Bottom operation.
    Small 10mm rout.

  • Quick View
    £17.83£28.26 + VAT

    4 Way locking system without tunnel. Available in magnetic to keep stray pets out.
    Suitable for PVCu, Metal & Wooden doors, brick walls and single and double glazed windows & doors.
    Note: It is only suitable to cut holes in toughened glass or double glazed units at time of manufacture.
    Additional collar and spare magnets available.

    Panel Fitting
    Cut Out Size: W 168mm x H 175mm

    Glass Fitting
    Cut Out Size: 212mm

  • Quick View
    £15.12 + VAT

    Suitable for PVCu, metal and wooden doors, brick walls and single and double glazed windows and doors.
    Note: It is only suitable to cut holes in toughened glass or double glazed units at time of manufacture.
    Classic is available with or without a tunnel or magnetic without tunnel.

    Panel Fitting
    Cut Out Size: W 169mm x H 169mm

    Glass Fitting
    Cut Out Size: 210mm

  • Quick View
    £6.24£11.50 + VAT

    Up to 4200mm Equivalent Area.
    Selection of control options.
    Upward and downward air deflection options.
    Widely specified within the social sector.
    Suitable for installation with sleeves that help improve window integrity.

  • Quick View
    £3.56£6.24 + VAT

    The Maxim Offset is a modern stylish handle with a distinctive scallop feature for use with an espagnolette window lock; and is the perfect choice for quality and reliability to suit Casement Windows. With key deadlocking for security the Maxim is suitable for Timber or PVCu casement windows; and for replacing existing handles the 40mm spindle size is ideal.

    Alongside stunning looks, our window handles have been tested to the highest technical standards and meet the requirements of PAS 24:2012 and Secured by Design on a number of window systems to confidently ensure the window security performance. All finishes meet the requirements of BS EN 1670:2007 Grade 3 (96 hours) for Corrosion Resistance to provide the a robust finish for your internal hardware; and to ensure smooth and consistent performance over time the handle is endurance tested in our test house to excess of 50,000 cycles.

    Features:
    Curved offset design for aesthetics and greater knuckle clearance available as left and right hand
    Ergonomically designed, the handle is push to open
    Latch creates a positive click on closing giving you peace of mind the window is locked
    Suitable for PVCu and Timber Casement Windows
    For replacing existing handles the 40mm spindle is ideal as this can be cut to size
    Tested to the highest technical standards and latest security requirements

  • Quick View
    £3.56£5.20 + VAT

    The Maxim Offset Locking Window Handle has a modern design and features a firm ergonomic grip for a handle that is easy to operate. The distinctive scallop feature and recessed push button has been designed for ease of use. Incorporating a positive stop the handle locks automatically on closing ensuring the window is locked giving you peace of mind. With key deadlocking for security the Maxim is suitable for Timber or PVCu casement windows; and for replacing existing handles the 40mm spindle size is ideal.

    Features:
    Curved offset design for aesthetics and greater knuckle clearance available as left and right hand
    Ergonomically designed, the handle is push to open
    Latch creates a positive click on closing giving you peace of mind the window is locked
    Suitable for PVCu and Timber Casement Windows
    For replacing existing handles the 40mm spindle is ideal as this can be cut to size
    Tested to the highest technical standards and latest security requirements

  • Quick View
    £3.71 + VAT

    The Connoisseur Inline has a classic design with a contemporary twist to create an elegant and stylish window handle for an espagnolette window lock. The perfect choice for all Casement Windows. Suitable for Timber and PVCu casement windows. Our window handles have been tested to the highest technical standards and meet the requirements of PAS 24:2012 on a number of window systems to confidently ensure the window security performance. All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware; and to ensure smooth and consistent performance over time the handle is endurance tested in our test house to excess of 50,000 cycles.

    Product measurements: 168mmx16mmx97mm

    Features:
    Universal non handed handle suitable for windows fitted with an espagnolette lock
    Ergonomically designed, the handle is push to open for egress applications
    Heavy duty sprung latch creates a positive click on closing giving you peace of mind the window is locked
    Tested to the highest technical standards and latest security requirements

  • Quick View
    £12.27 + VAT

    The Stainless Steel Escutcheon is designed to operate with a key operating mechanism Lock with a Euro Cylinder. The Knob is bolt fixed from the inside.

    Features:
    Brushed stainless steel bar handles, contemporary handles that create a stunning entrance door
    Austenitic grade 304 stainless steel construction, ultimate corrosion resistance
    Security product, cannot be removed without the removal of the cylinder
    Matching escutcheon to suit euro profile cylinders. Compatible with all euro profile cylinders and key wind up locks
    Screw fixed product for maximum strength
    Stylish contemporary Escutcheon design

  • Quick View
    £7.79 + VAT

    A non-dissolving cleaner for use on unplasticised uPVC profiles and profiles covered by foils. A non-flammable, user friendly formulation that is ideal for the safe and effective removal of uncured PU foam, uncured silicone, label/foil protection adhesive deposits, wax, pen, wet bitumen products, sealing compounds, and general dust, dirt, grime and debris.

    NOTE: If Foil Safe is being used to prepare areas prior to the application of sealant or adhesive, ensure that all residue is removed as this could hinder adhesion.

  • Quick View
    £20.45£22.23 + VAT

    Includes a closing panel. Fits PVCu, Metal & Wooden doors, also suitable for fitting into brick.

    Medium
    Cut Out Size: W 237mm x H 281mm

    Large
    Cut Out Size: W 370mm x H 314mm

  • Quick View
    £4.42 + VAT

    Spring-loaded releaseable arm.
    Manufactured from stainless steel.
    Complies to BS6375 : Part 2 : 1987.
    Ideal for retro-fitting.
    Different restrictor stud heights available for different profile stack heights.
    Please note, studs are ordered separately

  • Quick View
    £0.61 + VAT

    Restrictor stud for use with the Window Ware concealed restrictors.
    Profile stud heights related to friction hinge stack height I.E. 13mm stack = 9.5mm and 17mm stack = 14.5mm stud heights.

  • Quick View
    £17.39£20.06 + VAT

    ERA adjustable Door Viewers provide 160 degree field of vision from the internal side of the door allowing visual identification of the caller before the door is opened. Recommended for timber or composite doors. The Viewer can be easily adjusted to fit doors from 35mm to 54mm in thickness. Corrosion and weather resistant casing. ERA Locks have been providing high quality home and business security products for over 150 years. ERA is one of the UK’s most recognised Lock brands providing you with the peace of mind that your property and possessions are locked up safe and sound. ERA Locks are approved by Insurance companies.

    Product Dimensions: 17.8 x 10.8 x 3.2 cm

    Features:
    Allows visual identification
    160 degree viewing angle
    Plastic lens
    Adjustable length
    Fits doors 35mm to 54mm thick

  • Quick View
    £6.77£19.63 + VAT

    The 6 pin Euro Profile Double cylinder range is available in a vast number of sizes, complimenting the cylinder operated mortice locks and multi-point lock range. Available in both brass and nickel finishes, the 6 pin Euro Profile double cylinders are manufactured from solid brass. Supplied with 3 cut keys, the double cylinders allows for controlled access from both sides of the cylinder. All 6 pin double cylinders are anti pick resistant. Cylinders can be keyed alike allowing one set of keys to open numerous cylinders.

    Features:
    Ideal for locations that require controlled access from both sides of the lock
    Suits all Euro type mortice locks and multi-point lock products
    Supplied with 3 cut keys
    Anti pick security
    30,000 differs

  • Quick View
    £10.18£12.14 + VAT

    The 6 pin Euro Profile Thumbturn cylinder range is available in a vast number of sizes, complimenting the cylinder operated mortice locks and multi-point lock range. Available in both brass and nickel finishes, the 6 pin Euro Profile thumbturn cylinders are manufactured from solid brass. Supplied with 3 cut keys, the thumbturn cylinders allows for controlled access from both sides of the cylinder; using a key from the one side and the thumbturn on the other. Cylinders can be keyed alike allowing one set of keys to open numerous cylinders. All 6 pin double cylinders are anti pick resistant.

    Features:
    Optimum comfort and ease of operation through ergonomic thumbturn design
    Suits all Euro type mortice locks and multi-point lock products
    Supplied with 3 cut keys
    Anti pick security
    30,000 differs

  • Quick View
    £16.88£20.45 + VAT

    The British Standard Kitemarked 6 pin Euro Profile Double cylinder range is available in a vast number of sizes, complimenting the cylinder operated mortice locks and multi-point lock range. Available in both brass and satin finishes, the British Standard Kitemarked 6 pin Euro Profile double cylinders are manufactured from solid brass. Supplied with 3 cut keys, the double cylinders allows for controlled access from both sides of the cylinder. All British Standard Kitemarked 6 pin double cylinders are anti drill, anti pick and anti-bump resistant.

    Features:
    Ideal for locations that require controlled access from both sides of the lock
    Suits all Euro type mortice locks and multi-point lock products
    Supplied with 3 cut keys
    Anti Drill, Anti Pick and Anti bump resistant
    100,000 differs

  • Quick View
    £18.97£22.16 + VAT

    The British Standard Kitemarked 6 pin Euro Profile Thumbturn cylinder range is available in a vast number of sizes, complimenting the cylinder operated mortice locks and multi-point lock range. Available in both brass and satin finishes, the British Standard Kitemarked 6 pin Euro Profile thumbturn cylinders are manufactured from solid brass. Supplied with 3 cut keys, the thumbturn cylinders allow for turn access from inside of the door, with keyed access from outside. All British Standard Kitemarked 6 pin thumbturn cylinders are anti drill, anti pick and anti-bump resistant.

    Features:
    Optimum comfort and ease of operation through ergonomic thumbturn design
    Suits all Euro type mortice locks and multi-point lock products
    Supplied with 3 cut keys
    Anti Drill, Anti Pick and Anti bump resistant
    100,000 differs

  • Quick View
    £53.09£60.49 + VAT

    The Fortress door cylinder from ERA, has been designed to offer you maximum protection and peace of mind that your home is safe from any would be intruder. This high performance euro profile locking cylinder has six hardened high security pins for the ultimate anti-pick, anti-drill and anti-bump resistance, meaning this cylinder offers maximum resistance to forced entry and is independently tested to meet the latest security standards.

    Hardened pins for drill resistance and six trap pins for enhanced pick resistance means the cylinder offers excellent resistance to forced entry and if attacked, a security pin automatically triggers blocking the cylinder cam preventing unlawful entry. The cylinder can however still be operated from the inside using the key. Independently tested to meet the latest security standards: British Standard Kitemark (TS007 3*), Sold Secure Diamond and the police‘s Secured By Design accreditation. The dual coloured cylinder is supplied with 3 keys, and the thumbturn cylinders allow for turn access from inside of the door, with keyed access from outside; with an option to have multiple cylinders using the same key differ for front and back doors.

    Features:
    Optimum comfort and ease of operation through ergonomic thumbturn design
    Suits all Euro type mortice locks and multi-point lock products
    3 Star TS007 Cylinder
    Supplied with 3 cut keys
    Anti Snap, Anti Drill, Anti Pick and Anti bump resistant
    80,000 differs

  • Quick View
    £43.63£54.17 + VAT

    The Fortress door cylinder from ERA, has been designed to offer you maximum protection and peace of mind that your home is safe from any would be intruder. This high performance euro profile locking cylinder has six hardened high security pins for the ultimate anti-pick, anti-drill and anti-bump resistance, meaning this cylinder offers maximum resistance to forced entry and is independently tested to meet the latest security standards.

    Hardened pins for drill resistance and six trap pins for enhanced pick resistance means the cylinder offers excellent resistance to forced entry and if attacked, a security pin automatically triggers blocking the cylinder cam preventing unlawful entry. The cylinder can however still be operated from the inside using the key. Independently tested to meet the latest security standards: British Standard Kitemark (TS007 3*), Sold Secure Diamond and the police‘s Secured By Design accreditation. The dual coloured cylinder is supplied with 3 keys and the double cylinders allows for controlled access from both sides of the cylinder; with an option to have multiple cylinders using the same key differ for front and back doors.

    Features:
    Ideal for locations that require controlled access from both sides of the lock
    Suits all Euro type mortice locks and multi-point lock products
    3 Star TS007 Cylinder
    Supplied with 3 cut keys
    Anti Snap, Anti Drill, Anti Pick and Anti bump resistant
    80,000 differs

  • Quick View
    £14.49£17.84 + VAT

    Universal solution for windows and doors where a restricted opening is required. Ideally suited to homes with families and is compliant child resistant locking device for windows and balcony doors.

    Product Measurements: 130mm x 130mm x 30mm

    Features:
    Classified in accordance with BS EN: 13126-1: 2011 Grade 3 Impact Resistance, for building hardware restricted devices on windows and doors
    Compliant child resistant locking device for windows and balcony doors in accordance with BS EN 16281: 2013
    Suitable for domestic and commercial applications and for PVCu, Timber and Aluminium windows and doors.
    Aesthetically designed push to open cable lock with cut key locking for security
    Ergonomically developed for easy operation, push the button and simply insert the cable into lock body and turn the key
    Available in White, Brown, Polished Gold and Polished Chrome

  • Quick View
    £12.23 + VAT

    Gives extra security for entrance doors, When the chain has been located in the bracket conversation can take place through the door whilst still being secure in your home. The door needs to be in the closed position to be unchained. Available in Brass and Chrome.

    Features:
    Strong and simple to use
    Can only be unlocked when the door is closed
    Easy release when the door is closed
    Allows minimal opening for conversation
    Quick and easy locking/unlocking
    Suitable for PVCu and Timber Doors

  • Quick View
    £12.23 + VAT

    Gives extra security for entrance doors, When the chain has been located in the bracket conversation can take place through the door whilst still being secure in your home. The door needs to be in the closed position to be unchained. Available in Brass and Chrome.

    Features:
    Strong and simple to use
    Can only be unlocked when the door is closed
    Easy release when the door is closed
    Allows minimal opening for conversation
    Quick and easy locking/unlocking
    Suitable for PVCu and Timber Doors

  • Quick View
    £7.65 + VAT

    The ERA door restrictor has been designed to limit the opening of a door to a define angle, which can be chosen on installation and adjusted. Variable friction can be applied to the slider block (located on the restrictor arm) to prevent the door from slamming in windy conditions. The aluminium channel and universal frame bracket have been designed to suit most PVCu profiles and fits within the Eurogroove. For ease of installation, the bracket has the added feature of a release mechanism which allows the defined angle to be overridden if required. The restrictor arm is mounted in the sash’s eurogroove where the friction can be adjusted with the use of a straight blade screwdriver.

    Features:

    Variable friction can be applied to the slider block to prevent the door from slamming in windy conditions
    Aluminium channel and universal frame bracket have been designed to suit most PVCu profiles and fits within the Eurogroove
    For ease of installation, the bracket has the added feature of a release mechanism which allows the defined angle to be overridden if required
    Restrictor arm is mounted in the sash’s eurogroove
    Friction can be adjusted with the use of a straight blade screwdriver
    Tested to the highest technical standards

  • Quick View
    £8.86£8.99 + VAT

    The Horizon Egress Easy Clean Friction Stay has an easy to operate, durable and reliable design. Designed to open initially to egress in one operation with Easy-clean is achieved by fully opening the window, pushing the button and simply pulling the sash. Closing the window simply resets the hinge. The high quality Stainless steel hinge has been designed for long life performance and available in two stack heights – 13mm and 17mm with adjustable friction to suit the individual weight of the window.

    The hinge is capable of meeting the requirements of BS 6375 as part of a compliant window system, meets the requirements of BS EN 13126-6:2008 and has been designed to meet the requirements of Building Regulations Approved Documents B Fire Safety 2006 edition in a window of appropriate dimensions. PAS 24:2012 security performance can be obtained in conjunction with a Hingeguard. The Hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £10.33£10.54 + VAT

    The Horizon Egress Easy Clean Friction Stay has an easy to operate, durable and reliable design. Designed to open initially to egress in one operation with Easy-clean is achieved by fully opening the window, pushing the button and simply pulling the sash. Closing the window simply resets the hinge. The high quality Stainless steel hinge has been designed for long life performance and available in two stack heights – 13mm and 17mm with adjustable friction to suit the individual weight of the window.

    The hinge is capable of meeting the requirements of BS 6375 as part of a compliant window system, meets the requirements of BS EN 13126-6:2008 and has been designed to meet the requirements of Building Regulations Approved Documents B Fire Safety 2006 edition in a window of appropriate dimensions. PAS 24:2012 security performance can be obtained in conjunction with a Hingeguard. The Hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £3.75£3.78 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £4.31£5.81 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £4.85£6.58 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £5.99£6.08 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £8.35£8.43 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £3.42£3.48 + VAT

    The Horizon range of standard friction stays offer optimum weathersealing and operational performance. Designed with friction adjustment to hold a window open and stay in position. Manufactured from high quality stainless steel, the hinge is designed for high performance on all window types and sizes. The pointed sash arm and nylon end cap together provide an excellent gasket compression and smooth engagement. Rigorously tested in accordance with BS EN 13126-6:2008 and BS 6375-1:2009 to ensure maximum carrying weights in maximum size windows meet the criteria for lasting safe performance of the stay. The security performance of the hinge may be enhanced by the fitting of hingeguard protection plates or dog bolts. The anthracite grey end cap and nylon components enhances the look of the stay in a window

    PAS 024 security performance may be obtained in conjunction with an ERA hingeguard. The hingeguard is designed to only engage when the window is under attack and prevents disengagement by supporting the friction hinge. Window restriction can be achieved using a separate restrictor. The Horizon is available in top and side hung variants, stack heights of 13mm, 15mm and 17mm and in lengths of 210mm (8″) through to 616mm (24″ heavy duty). Horizon friction stays can be fitted to all types of casement window including PVCu, Aluminium and Timber. The hinge meets the corrosion requirements of BS EN 1670:2007 Grade 4 (240 hours) and the performance requirements of BS6375-1:2009 and has been cycle tested in excess of 25,000 cycles of opening and tested to BS EN 13126-6, Variable geometry stay hinges.

    Features:
    High quality stainless steel for long life performance
    Durable and reliable design
    Pointed arm and nylon end cap provide gasket compression and smooth engagement
    Adjustable opening positioning
    Enhanced security compliant when fitted with a separate hingeguard
    Rigorously tested to ensure maximum carrying weights in maximum size windows

  • Quick View
    £86.37 + VAT

    ERA Multipoint Universal Repair Lock Kit – 35mm Backset 92mm Centres, complete to suit UPVC Door

    Designed to replace most multi point locks in the PVCu UK market, and fits conventional 16mm wide Euro groove, with 35mm backset. It uses conventional adjustable rollers for enhanced performance and weather sealing, and high tensile steel mushrooms for anti-separation with adjustable keep plates.

  • Quick View
    £9.81£12.02 + VAT

    The Ashford Door Handle is a classic handle design perfectly matching into the Fab & Fix product portfolio. The range is tailored to meet both the needs of door manufacturers and replacement markets.

    Features:
    Solid die cast zinc construction for a sturdy feel
    Long baseplate with screws positions to suit most locks
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu profiles – all parts to hand
    Colour coordinated screw heads; matching hardware, down to the smallest detail

  • Quick View
    £9.81 + VAT

    The Balmoral Offset Sprung Lever Pad Door Handle is designed to operate a Multi Point Lock with a Euro Cylinder. The handle is designed to work with a twin spindle door lock. The handles screw fixings are located above the lever and at the bottom of the backplate to fit locks with a screw hole dimension of 211mm. The Balmoral has been designed with a longer 32mm wide backplate for new doors or replacing handles on existing doors.

    Suitable for PVCu, Timber, Aluminium and Composite doors. Our door handles have been tested to the highest technical standards and meet the requirements of PAS 24:2012 and Secured by Design on most door systems to confidently ensure the door security performance. All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware; and to ensure smooth and consistent performance over time the handle is endurance tested in our test house to excess of 200,000 cycles.

    Features:
    Solid die cast zinc construction for a sturdy feel
    Long baseplate with screws positions to suit most locks
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu profiles – all parts to hand
    Colour coordinated screw heads; matching hardware, down to the smallest detail
    Balmoral common baseplate; for unrivalled range options

  • Quick View
    £18.59£22.41 + VAT

    The Balmoral Door Handle is a classic handle design perfectly matching into the Fab & Fix product portfolio. The range is tailored to meet both the needs of door manufacturers and replacement markets.

    Features:

    Solid die cast zinc construction for a sturdy feel
    Long baseplate with screws positions to suit most locks
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu profiles – all parts to hand
    Colour coordinated screw heads; matching hardware, down to the smallest detail
    Balmoral common baseplate; for unrivalled range options

  • Quick View
    £27.64 + VAT

    The Blenheim Inline Sprung Lever Lever Door Handle is designed to operate a Multi Point Lock with a Euro Cylinder. The handles screw fixings are located above the lever and at the bottom of the backplate to fit locks with a screw hole dimension of 240mm. The Blenheim has been designed with a longer 29.5mm wide backplate for new doors or replacing handles on existing doors.

    Features:
    Solid die cast zinc construction for a sturdy feel
    Extra long baseplate with screws positions to suit most locks
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu profiles – all parts to hand
    Colour coordinated screw heads; matching hardware, down to the smallest detail
    Blenheim common baseplate; for unrivalled range options

  • Quick View
    £23.04 + VAT

    The Pembroke Locking Sliding Patio Door Handle is designed to operate a Standard Yale/ Roto Patio Door Lock with a Euro cylinder. The handles screw fixings are located above the lever and at the bottom of the backplate to fit locks with a screw hole dimension of 156mm. The Pembroke has been designed with a mid-sized 28mm wide backplate for new doors or replacing handles on existing doors.

    Suitable for PVCu, Timber, Aluminium and Composite doors. All handles have been tested to the highest technical standards and meet the requirements of PAS 24:2012 and on most door systems to confidently ensure the door security performance. All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware; and to ensure smooth and consistent performance over time the handle is endurance tested in our test house to excess of 200,000 cycles.

    Features:
    Solid die cast zinc construction
    Mid-sized baseplate with screws positions to suit most locks
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu, Timber, Aluminium and Composite Doors – all parts to hand
    Colour coordinated screw heads; matching hardware
    Pembroke common baseplate

  • Quick View
    £26.71£27.64 + VAT

    The Windsor Inline Sprung Lever Lever Door Handle is designed to operate a Multi Point Lock with a Euro Cylinder. The handles screw fixings are located below the lever and at the bottom of the backplate to fit locks with a screw hole dimension of 122mm. The Windsor has been designed with a shorter 28mm wide backplate for new doors or replacing handles on existing doors.

    Suitable for PVCu, Timber, Aluminium and Composite doors; the handle set is sprung allowing perfect lever operation, lever return and alignment. Our door handles have been tested to the highest technical standards and meet the requirements of PAS 24:2012 and on most door systems to confidently ensure the door security performance. All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware; and to ensure smooth and consistent performance over time the handle is endurance tested in our test house to excess of 200,000 cycles.

    Features:
    Solid die cast zinc construction for a sturdy feel
    Compact baseplate with screws in close proximity, combats lever attack
    Ergonomic lever and low friction nylon bush, easy to grip and smooth action
    Supplied with screw/ spindle pack to suit PVCu profiles – all parts to hand
    Colour coordinated screw heads; matching hardware, down to the smallest detail
    Windsor common baseplate; for unrivalled range options

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in letters A-F. Supplied with colour coordinated screws. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Product Measurements: 80mm x 50mm x 4.5mm

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £9.82£11.18 + VAT

    The Nu Victorian Urn Medium Face Fix Door Knocker Without Spyhole is a medium sized knocker in a classic design to create an elegant and stylish door. Designed with patented face fixing plate and works with Timber, Composite and PVCu doors. The face fixing ensures easy installation without using fixing bolts or having to drill through the door. Cater for all major door depths.

    Alongside stunning looks our finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware.

    Features:
    Classic door knocker design to create an elegant and stylish door
    Patented face fixing plate suitable for Timber, Composite and PVCu doors
    Face fixing for easy installation and saves you drilling through the door.
    Fully suites to our Perfectly Matching range of hardware available in 10 finishes
    Includes fixing bracket

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in number 0-9. Supplied with colour coordinated screws. The Door Numerals have a classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors.

    All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Fully suites to our Perfectly Matching range of hardware available in 10 finishes
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in number 0-9. Supplied with colour coordinated screws. The Door Numerals have a classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors.

    All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Fully suites to our Perfectly Matching range of hardware available in 10 finishes
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail

  • Quick View
    £3.35£16.35 + VAT

    Classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors. Available in number 0-9. Supplied with colour coordinated screws. The Door Numerals have a classic design with a contemporary twist to create an elegant and stylish front door. Suitable for Timber, Composite and PVCu doors.

    All finishes meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance to provide the most robust finish for your hardware. Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail. Includes 2xM3.5x25mm countersunk flat head screws.

    Features:
    Classic design with a contemporary twist to create an elegant and stylish front door
    Suitable for Timber, Composite and PVCu doors
    Fully suites to our Perfectly Matching range of hardware available in 10 finishes
    Supplied with colour coordinated screws to ensure perfectly matching hardware, even down to the smallest detail